iPRO Vertical Turret Milling Machine – iV-500
iV-500
- Spindle material is SCM415 full hardened through carbonizing heat treatment
- NST#30/R8 spindle with 3HP variable speed motor (inverter motor option is available).
- Spindle quill drive box is transmitted by ballscrew for better precision.
- Essential castings are made of high grade of Meehanite cast iron, which has been stressed and relieved to provide a rigid machine structure.
- Standard with 10” X 54” table with hardened and ground.
- Table T-slot is precision ground to exact tolerance.
- Precision ballscrews are equipped on X&Y axes.
- X and Y slideways and gibs are coated with Turcite-B to provide smooth and wear resistant surface.
- 1:2 ratio timing belt pulleys on XY axes to increase drive torque.
| Specification | iV-500 | |
| Travel | ||
| X/Y/Z travel | 830/405/378mm (32.7″/15″/14″) | |
| Spindle nose to table surface | 85~535mm (3.3″~21″) | |
| Spindle center to column surface | 170~730mm (6.7″-28.7″) | |
| Ram travel | 560mm (22″) | |
| Table | ||
| Table size | 1370 x 250mm (54″ x 10″) | |
| Table T-slot (No. x size) | 3 x 16mm (3 x 0.63″) | |
| Max. table load | 500kgs (1,102 Lbs) | |
| Spindle | ||
| Spindle taper | NST#30/R8 | |
| Spindle speed | 5000RPM (60Hz) | |
| Quill feed | 0.04mm~0.08mm~0.14mm (0.0015″~0.003″~0.006″) | |
| Transmission | Variable speed (Opt. inverter) | |
| Quill travel | 127mm (5″) | |
| Over swivel on turret | 360゜ | |
| Head swivel (R&L) | +/-45゜ | |
| Head swivel (Up & down) | +/-45゜ | |
| XY feed rate | 0-3m/min (0-0.12″) | |
| Rapid feed rate XYZ | 5mm/min (0.2″/min) | |
| Motor | ||
| Spindle motor | 3HP | |
| XYZ motor | 1Kw AC servo motor | |
| XYZ transmission | 1:2 Belt | |
| Coolant pump | 1/8HP | |
| Machine size | ||
| Overall width (A) | 1900mm (75″) | |
| Overall depth (B) | 2120mm (83.5″) | |
| Overall height (C) | 2262mm (89″) | |
| Net weight | 1700kgs (3,748 Lbs) | |
We reserve the right to modify and improve the specification without notice. The specification shown above is for reference only.
