Carticn
0
5KS / 5KV
5KS / 5KV - Image 2
  1. 5KS / 5KV
  2. 5KS / 5KV - Image 2

5KS / 5KV

Price on Availability

SPECIFICATIONS

  Machine Model 5KS / 5KV
Working Capacity
Table size 254x1270mm (10”x50”)
T-slot of table (Q’ty x size) 3x16mm (3×0.63”)
Longitudinal travel (X axis) Manual: 760mm (30”)
Auto: 690mm (27”)
Cross travel (Y axis) 410mm (16.1”)
Vertical travel of knee (Z axis) 450mm (17.7”)
Ram travel 560 mm (22”)
Quill travel 127mm (5”)
Spindle taper NST#40
Spindle to table nose 85~535mm (3.3”~21”)
Spindle center to column 178~738mm (7”~29”)
Over swivel on turret 360゜
Head swivel (R&L) +/-45゜
Head tilt (up&down) Option
Spindle motor 5HP
X axis motor Option: Power feed
Lifting motor 1HP gear type motor
Quill feed 0.04~0.08~0.14 mm/rpm (0.0016” ~ 0.003” ~ 0.006”)
X axis rapid speed Nil
Lifting motor speed Nil
Overall height 2360mm (93”)
Overall depth 2120mm (83.5”)
Overall width 1790mm (70.5”)
Net weight 1600Kgs (3500lbs)
Spindle speed
Step head 50Hz: 54~2875rpm
60Hz: 65~3450rpm
Variable speed head 50Hz: 40~3600rpm
60Hz: 60~4300rpm
Quotation Request

Starting From

5KS

  • Spindle material made from SCM415 (SAE4115) Cr-Mo steel alloy with tempering treatment, fully hardened and ground. Spindle run out: 0.005mm.
  • Centralized one shot lubrication system for ways, nuts and leadscrews.
  • Precise angular contact spindle bearing.
  • 10 speeds step-pulley drive.
  • Unique design on Hi-Low gear speed commutation, bearing support on both side of spindle pulley.
  • Adjustable break handle increases the life of brake shoe.
  • Longer saddle (650mm) support to the table provides high accuracy and rigid machining
  • Turcite-B coated on X Y ways.
  • Square way design on Y and column slideway.

    • 5KV

  • Spindle material made from SCM415 (SAE4115) Cr-Mo steel alloy with tempering treatment, fully hardened and ground. Spindle run out: 0.005mm.
  • Centralized one shot lubrication system for ways, nuts and leadscrews.
  • Precise angular contact spindle bearing.
  • Variable speed drive up to 4300 rpm/60Hz 3600rpm/50Hz.
  • Patented special copper alloy SAM214 for vari-disc keys with precise ground and grease lubrication groove designed to prevent overheating.
  • Bearing support at the end of motor shaft.
  • Double sided vari-disc belt provides lower noise level.
  • Motor shaft material made from SCM425 Cr-Mo steel alloy, diameter 28mm.

    • Reviews

    There are no reviews yet.

    Be the first to review “5KS / 5KV”

    Your email address will not be published. Required fields are marked *

    1 2 3 4 5